TM 9-2320-366-20-5
NOTE
Install plastic cable ties as required.
(10) Install hoses (14 and 15) on 90-degree fittings (2
and 3).
(11) Position cab hydraulic cylinder (4) between cab
frame (16) with cab hydraulic cylinder mounting
bolt (17) and self-locking nut (18).
CAUTION
Ensure long side of control cam
remains aligned with short slot in
mounting bracket. Failure to comply
may result in damage to equipment.
(12) Tighten self-locking nut (18) to 180-232 lb-ft
244-314 Nm).
19-59