TM 9-2320-366-20-5
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Nipple, Tube (Item 33, Appendix D)
Wrench, Torque 0-600 lb-ft (Item 60, Appendix C)
Grease, Automotive and Artillery (GAA) (Item 22,
Wrench Set, Socket (Item 50, Appendix C)
Pan, Drain (Item 24, Appendix C)
Hydraulic Fluid A (Item 25, Appendix D)
Sling, Endless (Item 32, Appendix C)
Packing, Preformed (2) (Item 181, Appendix G)
Gloves, Rubber (Item 13, Appendix C)
Packing, Preformed (Item 188, Appendix G)
Goggles, Industrial (Item 15, Appendix C)
Nut, Self-Locking (Item 170, Appendix G)
Cab Support Tool (Item E-4, Appendix E)
Pin, Cotter (Item 230, Appendix G)
Pin, Cotter (Item 231, Appendix G)
Washer, Spring (Item 286, Appendix G)
Washer, Spring (Item 295, Appendix G)
Personnel Required
(2)
a. Removal.
(1) Place drain pan under cab hydraulic cylinder (1).
WARNING
Hydraulic fluid (MIL-H-5606) is TOXIC.
Wear protective goggles and gloves; use
only in well-ventilated area; avoid contact
with skin, eyes, and clothes. Skin and
clothing that come in contact with
hydraulic oil should be washed
immediately. Saturated clothing should
be removed immediately.
Failure to
comply may result in injury to personnel.
NOTE
Remove plastic cable ties as required.
Tag hoses and connection points prior to
disconnecting.
(2) Disconnect hoses (2 and 3) from 90-degree fittings (4
and 5).
