TM 9-2320-366-20-5
WARNING
Cab weighs approximately 3000 lbs
(1362 kgs) attach a suitable lifting device
prior to raising cab. Failure to comply
may result in injury to personnel.
NOTE
Steps (7) through (9) require the aid of an
assistant.
(7) Raise cab.
(8) Install cab support tool on engine rear lifting bracket
(8).
(9) Lower cab on cab support tool.
(10) Remove cotter pin (9), washer (10), and preformed
packing (11) from cab hydraulic cylinder mounting bolt
(12). Discard cotter pin and preformed packing.
(11) Disengage pivot arm (13) and spacer (14) from cab
hydraulic cylinder mounting bolt (12).
(12) Remove self-locking nut (15), cab hydraulic cylinder
mounting bolt (12), and cab hydraulic cylinder (1) from
cab frame (16). Discard self-locking nut.
19-55
