TM 9-2320-366-20-5
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning/Inspection
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts (Cont)
CTIS ECU removed (para 12-6).
Antifreeze, Ethylene Glycol, Permanent (Item 12,
Auxiliary panel removed, if equipped (para 7-8).
Kick panel removed (para 16-3).
Rivet, Blind (12) (Item 258, Appendix G)
Gasket (Item 30, Appendix G)
Gasket (Item 37, Appendix G)
Tools and Special Tools
Pan, Drain (Item 24, Appendix C)
Seal (Item 265, Appendix G)
Goggles, Industrial (Item 15, Appendix C)
Gasket (Item 32, Appendix G)
Gloves, Rubber (Item 13, Appendix C)
Gasket (Item 38, Appendix G)
Tool Kit, Genl Mech (Item 46, Appendix C)
Gasket (2) (Item 33, Appendix G)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Gasket (Item 34, Appendix G)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Gasket (Item 35, Appendix G)
Socket Set, Socket Wrench (Item 36, Appendix C)
Rag, Wiping (Item 50, Appendix D)
Tool Kit, Blind Rivet (Item 44, Appendix C)
Solvent, Dry Cleaning (Item 65, Appendix D)
Drill, Portable, Electric (Item 7, Appendix C)
Soap, Laundry (Item 63, Appendix D)
Drill Set, Twist (Item 6, Appendix C)
Gasket (3) (Item 40, Appendix G)
Gasket (Item 36, Appendix G)
Plastic Strip (Item 240, Appendix G)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape (Item
Nut, Self-Locking (3) (Item 177, Appendix G)
20, Appendix D)
Nut, Self-Locking (3) (Vehicle serial numbers
Cap and Plug Set (Item 14, Appendix D)
0001 through 3696 equipped with original
Ties, Cable, Plastic (Item 69, Appendix D)
personnel heaters) (Item 177, Appendix G)
Strap, Push Mount (2) (Item 65.1, Appendix D)
Decal (Item 11, Appendix G)
NOTE
Perform steps (1) through (25) to remove
personnel heater assembly for access.
a. Removal.
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
(1) Position drain pan under radiator drain cock (1).
(2) Open radiator drain cock (1) and drain approximately 15-
20 qt (14-19 L) of coolant from radiator (2).
(3) Close radiator drain cock (1).
Change 1
