TM 9-2320-366-20-5
b. Installation (All Models Except M1093/M1094).
(1) Cut two seals (1) to 2-1/2 in. (6.3 cm).
(2) Cut seal (2) to 86-3/4 in. (220.3 cm).
(3) Cut seal (3) to 86-3/4 in. (220.3 cm).
(4) Cut two seals (4) to 5-1/4 in. (13.3 cm).
(5) Install seals (2 and 3) and two seals (4) on defrost cover
(5).
(6) Install six clip nuts (6) in dashboard (7).
(7) Position defrost cover (5) on vehicle with six washers (8)
and screws (9).
(8) Tighten four screws (9) to 22-27 lb-in. (2-3 Nm).
c. M1093/M1094 Removal.
(1) Release two latches (1) and fold down windshield frame
(2).
18-27
