TM 9-2320-366-20-5
b. Disassembly.
(1) Loosen two set screws (1) in fan switch knob (2).
(2) Remove fan switch knob (2) from fan switch (3).
NOTE
Perform steps (3) and (5) on vehicle serial
numbers 0001 through 3696 equipped with
original personnel heaters.
(3) Loosen self-locking nuts (4) on knobs (5, 6, and 7).
(4) Remove knobs (5, 6, and 7) from HEAT control cable
(8), VENT control cable (9), and DEFR control cable
(10).
(5) Remove self-locking nuts (4) from HEAT control cable
(8), VENT control cable (9), and DEFR control cable
(10). Discard self-locking nuts.
(6) Remove six screws (11) and control panel (12) from
personnel heater (13).
18-35