TM 9-2320-366-20-5
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Inspection
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts
MHC erected over cargo bed (TM 9-2320-366-10-1).
Solvent, Dry Cleaning (Item 65, Appendix D)
Engine shut down (TM 9-2320-366-10-1).
Wire, Nonelectrical (Item 72, Appendix D)
Pin, Cotter (Item 232, Appendix G)
Pin, Cotter (Item 227, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Nut, Self-Locking (Item 140, Appendix G)
Socket, Socket Wrench (Item 70, Appendix B)
Nut, Self-Locking (Item 174, Appendix G)
Cutter, Bolt (Item 16, Appendix B)
Clamp, Wire Rope, Saddled (Item 9.1,
Gloves, Welders (Item 14, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Gloves, Rubber (Item 13, Appendix C)
Apron, Rubber (Item 3, Appendix C)
References
Weight, 200-250 lbs (91-113 kgs)
FM 5-125
TB 43-0142
a. Removal.
WARNING
Cable can become frayed or contain
broken wires. Wear heavy leather-palmed
gloves when handling cable. Frayed or
broken wires can injure hands. Failure to
comply may result in injury to personnel.
(1) Remove cotter pin (1) from nut (2). Discard cotter
pin.
(2) Remove nut (2), washer (3), hook block (4), washer
(5), and screw (6) from wedge socket (7).
17-7
