TM 9-2320-366-20-4
16-17. TOOL BOX REPLACEMENT/REPAIR (CONT)
(4) Remove two self-locking nuts (10), screws (11), washers
(12), and tool box (13) from front lifting beam (14).
Discard self-locking nuts.
(5) Remove two screws (15), washers (16), and tool box
(13) from backup hydraulic pump (4).
b. Disassembly.
WARNING
Wear appropriate eye protection when
removing rivets. Failure to comply may
result in injury to personnel.
NOTE
Tool box doors may be installed with rivets or
screws and nuts. Tool box door with rivets
shown.
(1) Remove five rivets (1) and tool box door (2) from hinge
(3).
(2) Remove five rivets (4) and hinge (3) from tool box (5).
16-138
Change 1
