TM 9-2320-366-20-4
b. Installation.
(1) Position spacer (1) and seat belt buckle (2) with screw
(3) on cab floor (4).
(2) Tighten screw (3) to 30-35 lb-ft (41-47 Nm).
NOTE
Perform steps (3) through (7) on center seat
belt.
(3) Position spacer (5), center seat belt retractor (6), center
seat belt (7), washer (8), and screw (9) on rear bulkhead
(10).
(4) Tighten screw (9) to 30-35 lb-ft (41-47 Nm).
(5) Close plastic cover (11).
(6) Position two spacers (12), center seat belt mounting
bracket (13), washer (14), and screw (15) on rear
bulkhead (10).
(7) Tighten screw (15) to 30-35 lb-ft (41-47 Nm).
16-135
