TM 9-2320-366-20-4
This task covers:
a. Removal
c. Assembly
b. Disassembly
d. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Adhesive (Item 3, Appendix D)
Pin, Cotter (Item 236, Appendix G)
Grommet, Nonmetallic (Item 49, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Bumper, Rubber (12) (Item 5, Appendix G)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Channel, Rubber (Item 7, Appendix G)
Socket Set, Socket Wrench (Item 36, Appendix C)
a. Removal.
NOTE
Left and right storage boxes are removed the
same way. Left storage box shown.
(1) Open storage box cover (1).
(2) Remove six screws (2) and washers (3) from storage
box (4).
(3) Remove storage box (4) from cab floor (5).
b. Disassembly.
(1) Remove six nuts (1), washers (2), screws (3), and
storage box cover (4) from storage box (5).
(2) Remove two nuts (6), screws (7) and clamp (8) from
storage box cover (4).
