TM 9-2320-366-20-4
This task covers:
a. Removal
c. Assembly
b. Disassembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10-1).
Drill Set, Twist (Item 6, Appendix C)
Spare tire lowered (TM 9-2320-366-10-2).
Goggles, Industrial (Item 15, Appendix C)
Tools removed from tool box (TM 9-2320-366-10-1).
Hydraulic manifold removed (para 19-4).
Materials/Parts
Latch, Bail Head (Item 67, Appendix G)
Seal, Nonmetallic (Item 269, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Nut, Self-Locking (8) (Item 155, Appendix G)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Nut, Self-Locking (2) (Item 156, Appendix G)
Screwdriver Attachment, Socket Wrench (Item 62,
Personnel Required
Drill, Electric, Portable (Item 7, Appendix C)
(2)
a. Removal.
(1) Remove two screws (1), washers (2), and cover (3) from
backup hydraulic pump (4).
(2) Remove four self-locking nuts (5) and screws (6) from
spare tire retainer assembly (7). Discard self-locking
nuts.
(3) Remove four self-locking nuts (8) and screws (9) from
spare tire retainer assembly (7). Discard self-locking
nuts.
Change 1
