TM 9-2320-366-20-4
16-15. SEATS REPLACEMENT/REPAIR (CONT)
e. Seat Assembly.
NOTE
Plastic film to be provided in replacement
seat cover kit.
(1) Position plastic film (1) over seat back (2).
(2) Install two wire supports (3) in seat back cover (4).
(3) Position seat back cover (4) tightly over plastic film (1)
and seat back (2).
WARNING
Wear appropriate eye protection when
installing hog rings. Hog rings are under
tension and can act as projectiles when
being installed. Failure to comply may
result in injury to personnel.
CAUTION
Ensure hog rings are crimped over wire
support wires on bottom of seat back frame.
Failure to comply may result in damage to
equipment.
(4) Install five hog rings (5) equally spaced on seat back
cover (4).
(5) Position seat bottom cover (6) tightly on seat bottom (7).
(6) Install two hog rings (8) on front of seat bottom cover (6).
(7) Install two hog rings (9) on rear of seat bottom cover (6).
(8) Install six hog rings (10) on left and right side of seat
bottom cover (6).
Change 1
