TM 9-2320-366-20-4
(9) Remove 12 spacers (24) from front fender (9).
(10) Remove three self-locking nuts (25), screws (26),
brackets (27) and step (28) from front fender (9).
Discard self-locking nuts.
b. Front Fender Installation (All Models
Except M1093/M1094).
NOTE
Left and right front fenders are installed the
same way. Left side shown.
(1) Position step (1) and three brackets (2) on front fender
(3) with three screws (4) and self-locking nuts (5).
(2) Tighten three self-locking nuts (5) to 18-22 lb-ft (24-30
Nm).
(3) Install 12 spacers (6) in front fender (3).
16-89
