TM 9-2320-366-20-4
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Front Fender Removal (All Models Except
M1093/M1094).
NOTE
Perform step (1) on right side.
(1) Open cab step tread (1) on cab step (2).
(2) Raise cab (TM 9-2320-366-10-1).
NOTE
Perform steps (3) and (4) on left side.
(3) Remove self-locking nut (3), washer (4), screw (5),
washer (6), terminal lug TL94 (7), and lockwasher (8)
from front fender (9). Discard self-locking nut and
lockwasher.
(4) Remove three self-locking nuts (10), six washers (11),
and three screws (12) from front fender (9). Discard
self-locking nuts.
