TM 9-2320-366-20-4
k. Upper Bracket Removal.
(1) Remove three self-locking nuts (1), six washers (2),
guard support (3), and three screws (4) from splash
guard (5). Discard self-locking nuts.
(2) Remove self-locking nut (6), two washers (7), screws (8),
and guard support (9) from vehicle. Discard self-locking
nuts.
l.
Upper Bracket Installation.
(1) Position guard support (1) on vehicle with screw (2), two
washers (3), and self-locking nut (4).
(2) Tighten self-locking nut (4) to 88-106 lb-ft (119-144 Nm).
(3) Install guard support (5) and splash guard (6) on vehicle
with three screws (7), six washers (8), and three self-
locking nuts (9).
End of Task.
16-85
