TM 9-2320-366-20-4
16-4. M1093/M1094 CAB ROOF REPLACEMENT (CONT)
(2) Position five centering cones (3) on cab roof (2) with five
screws (4)
(3) Position 11 centering cups (5) on cab roof (2) with 11
screws (6).
(4) Tighten five screws (4) and 11 screws (6) to 62-124 lb-
in. (7-14 Nm).
CAUTION
Begin inside and outside rubber strip
installation on opposite sides of each other.
Failure to comply may result in damage to
equipment.
(5) Install inside rubber strip (7) on roof hatch (8).
(6) Install outside rubber strip (8.1) on roof hatch (8).
(7) Install 6 in. (15.2 cm) back-up rubber strips (8.2)
centered on joints of inside and outside rubber strips (7
and 8.1).
NOTE
Steps (8) through (11) require the aid of an
assistant.
(8) Position roof hatch (8) on cab roof (2) with matchmarks
aligned.
(8.1) Position 12 washers (8.3) and screws (9) in roof hatch
(8).
(8.2) Tighten 12 screws (9) to 35-41 lb-ft (48-56 Nm).
16-10
Change 1
