TM 9-2320-366-20-4
REPAIR
This task covers:
a. Removal
d. Installation
b. Disassembly
e. Follow-On Maintenance
c. Assembly
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Spare tire removed (TM 9-2320-366-10-2).
Goggles, Industrial (Item 15, Appendix C)
Cab raised (TM 9-2320-366-10-1).
Socket Set, Socket Wrench (Item 36, Appendix
Hydraulic manifold removed (para 19-4).
Tool box removed (para 16-17).
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix
Cab leveling valve removed (para 16-8).
Air/hydraulic power unit and bracket removed (para
19-3).
Materials/Parts
Ether starting aid removed (para 4-15).
Dispenser, Pressure Sensitive Adhesive Tape
Shunt removed (para 7-29).
(Item 20, Appendix D)
100 amp reverse polarity relay removed, if equipped
Cap and Plug Set (Item 14, Appendix D)
(para 7-30).
Ties, Cable, Plastic (Item 69, Appendix D)
200 amp reverse polarity relay removed, if equipped
Nut, Self-Locking (12) (Item 156, Appendix G)
(M1093) (para 20-47).
Nut, Self-Locking (4) (Item 128, Appendix G)
Pin, Cotter (2) (Item 231, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Personnel Required
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
(3)
Pan, Drain (Item 24, Appendix C)
Gloves, Rubber (Item 13, Appendix C)
a. Removal.
CAUTION
Cap or plug intake air cleaner hoses to
prevent contamination of turbocharger.
Failure to comply may result in damage to
turbocharger and engine.
(1) Loosen clamp (1) on intake air cleaner boot (2).
(2) Disconnect intake air cleaner boot (2) from intake air
cleaner housing (3).
(3) Loosen clamp (4) on air compressor intake hose (5).
(4) Disconnect air compressor intake hose (5) from intake
air cleaner boot (2).
