TM 9-2320-366-20-4
14-8. M1088 PLATFORM AND BRACKETS REPLACEMENT/REPAIR (UNMODIFIED) (CONT)
d. Platform Assembly.
NOTE
Number of fasteners will vary from floor plate
to floor plate. Refer to Table 14-1, M1088
Platform Attaching Hardware for number
of fasteners required. Floor plate B shown.
(1) Position floor plate (1) on platform (2) with three
screws (3) and self-locking nuts (4).
(2) Tighten three self-locking nuts (4) to 20-30 lb-ft
(27-41 Nm).
e.
Bracket Removal.
(1) Remove four self-locking nuts (1), screws (2), and
two front brackets (3) from frame (4). Discard self-
locking
nuts.
(2) Remove four self-locking nuts (5), screws (6) and
two rear brackets (7) from frame (4). Discard self-
locking nuts.
Change 2
