TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Auxiliary starter solenoid removed (para 7-6).
Cap and Plug Set (Item 14, Appendix D)
Power steering pump reservoir drained (Appendix H).
Oil, Lubricating, OE/HDO 10 (Item 42, Appendix
Nut, Self-Locking (2) (Item 156, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Clamp (Item 8, Appendix G)
Dispensing Pump, Hand Driven (Item 5, Appendix C)
Clamp (Item 9, Appendix G)
Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B)
a. Removal.
CAUTION
Cap or plug hydraulic connections to prevent
contamination of power steering system.
Failure to comply may result in damage to
equipment.
NOTE
Perform steps (1) through (3) on vehicles
that have not previously had a power
steering pump reservoir or power steering
return hose replaced.
(1) Pry hose clamp end (1) open.
(2) Disconnect return hose (2) from power steering
pump reservoir (3).
(3) Remove hose clamp (1) from return hose (2).
Discard hose clamp.
Change 1
