TM 9-2320-366-20-4
VALVE, KNEELING VALVE AND BRACKET REPLACEMENT
This task covers:
a.
Removal
c.
Follow-On Maintenance
b.
Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10-1).
Adapter, Socket Wrench (Item 2, Appendix B)
Air tanks drained (TM 9-2320-366-10-1).
Rim cover removed, if equipped (Para 12-10).
Materials/Parts
Sealing Compound (Item 61, Appendix D)
Packing, Preformed (Item 180, Appendix G)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Packing, Preformed (2) (Item 212, Appendix
Tool Kit, Genl Mech (Item 46, Appendix C)
Fishing Tool, Pneumatic Tire Valve (Item 9,
Packing, Preformed (Item 213, Appendix G)
Seal, Nonmetallic (2) (Item 271, Appendix G)
Socket, Socket Wrench (Item 70, Appendix B)
Filter Element, Fluid (Item 19, Appendix G)
Socket, Socket Wrench (Item 37, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench Set, Socket (Item 50, Appendix C)
a. Removal.
WARNING
The sudden release of high pressure air
can cause damage to eyes.
Wear
appropriate eye protection when working
near press-urized air. Failure to comply
may result in injury to personnel.
(1) Remove valve cap (1) from CTIS manifold valve
(2).
(2) Remove valve core (3) from CTIS manifold valve
(2) and allow time for tire to deflate.
NOTE
Perform step (3) if wheel is mounted on
vehicle.
(3) Remove banjo bolt (4), CTIS hose (5), and two
seals (6) from hollow wheel stud (7). Discard
seals.
NOTE
Perform step (4) if wheel was removed from
spare tire retainer.
(4) Remove nut (8), screw (9), and two seals (6) from
CTIS hose (5). Discard seals.
Change 2
