TM 9-2320-366-20-4
NOTE
Vehicles may be equipped with either
corrosion enhanced clamps or non-
corrosion enhanced clamps. Corrosion
enhanced clamps have a self-locking nut
and work lining. When removing a non-
corrosion enhanced clamp, replace it with
a corrosion enhanced clamp.
Perform steps (7) through (8.1) on vehicles not
equipped with corrosion enhanced clamps.
(7) Loosen two screws (12) on clamps (13).
(8) Remove secondary air tank (14) from clamps (13).
(8.1) Remove two clamps (13) from battery box (14.1).
Discard clamps and screws.
NOTE
Perform steps (8.2) and (8.3) on vehicles
equipped with corrosion enhanced clamps.
(8.2) Remove two self-locking nuts (14.2) from clamps (13).
(8.3) Remove primary air tank (14) from clamps (13).
Change 1
