TM 9-2320-366-20-4
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(7) Apply antiseize compound to threads of branch tee fitting
(8).
(8) Install branch tee fitting (8) in secondary air tank (7).
(9) Apply antiseize compound to threads on both sides of
reducer fitting (9), and threads of 90-degree fitting (10),
one-way check valve (11), and 90-degree fitting (12).
(10) Install reducer fitting (9) in secondary air tank (7).
(11) Install two-way check valve (5) on reducer fitting (9).
(12) Install 90-degree fitting (10) in two-way check valve (5).
(13) Install one-way check valve (11) in secondary air tank
(7).
(14) Install 90-degree fitting (12) in one-way check valve (11).
