TM 9-2320-366-20-4
(14) Remove 90-degree fitting (4) from two-way check valve
(18).
(15) Remove 90-degree fitting (16) from two-way check valve
(18).
(16) Remove inversion valve (19) from reducer fitting (20).
(17) Remove reducer fitting (20) from two-way check valve
(18).
(18) Remove 90-degree fittings (9 and 11) from inversion
valve (19).
d. Secondary Air Tank Installation (M1088/M1089).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(1) Apply antiseize compound to threads of 90-degree
fittings (1 and 2), threads on both sides of reducer fitting
(3), 90-degree fitting (4), and 90-degree fitting (5).
(2) Install 90-degree fittings (1 and 2) in inversion valve (6).
(3) Install reducer fitting (3) in two-way check valve (7).
(4) Install inversion valve (6) on reducer fitting (3).
(5) Install 90-degree fitting (4) in two-way check valve (7).
(6) Install 90-degree fitting (5) in two-way check valve (7).
11-143
