TM 9-2320-366-20-4
11-22. SECONDARY AND PRIMARY AIR TANKS REPLACEMENT (CONT)
(4) Disconnect air hose (7) from branch tee fitting (6).
(5) Disconnect air hose (8) from 90-degree fitting (9).
(6) Disconnect air hose (10) from 90-degree fitting (11).
NOTE
Vehicles may be equipped with either
corrosion enhanced clamps or non-
corrosion enhanced clamps. Corrosion
enhanced clamps have a self-locking nut
and work lining. When removing a non-
corrosion enhanced clamp, replace it with
a corrosion enhanced clamp.
Perform steps (7) through (8.1) on vehicles not
equipped with corrosion enhanced clamps.
(7) Remove two screws (12) from clamps (13).
(8) Remove secondary air tank (14) from two clamps (13).
(8.1) Remove two clamps (13) from battery box (14.1).
Discard clamps and screws.
Change 1
