TM 9-2320-366-20-4
11-2. FRONT BRAKE SHOES REPLACEMENT/ADJUSTMENT (CONT)
CAUTION
Wheel drum clearance must be checked along
centerline of brake shoe at scallop. Failure to
comply may result in damage to equipment.
Record the number of clicks as adjusting screw
is loosened. All adjustments on any wheel
should be within six clicks of one another. If
not, repeat procedure or examine for damage.
Failure to comply may result in damage to
equipment.
(8) Back off brake adjusting screw (5) to obtain 0.020-0.040
in. (0.051-0.102 cm) clearance.
(9) Repeat steps (6 through 8) for second brake adjusting
screw.
(10) Remove two screws (2), lockwashers (3), and brake
adjusting tool supports from spider (4). Discard
lockwashers.
(11) Install two lockwashers (3) and screws (2) in spider (4).
e. Follow-On Maintenance.
(1) Install tire (TM 9-2320-366-10-2).
(2) Start engine (TM 9-2320-366-10-1).
(3) Road test vehicle and check for proper brake operation.
(4) Shut down engine (TM 9-2320-366-10-1).
End of Task.
11-8
