TM 9-2320-366-20-4
This task covers:
a. Installation
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts
Batteries disconnected (para 7-57).
Antiseize Compound (Item 58, Appendix D)
Cab raised (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape (Item
M1088/M1089 transmission auxiliary oil cooler
20, Appendix D)
hoses removed (para 8-16).
Cap and Plug Set (Item 14, Appendix D)
Transmission oil cooler tubes removed (para 8-
Ties, Cable, Plastic (Item 69, Appendix D)
17).
Nut, Self-Locking (7) (Item 150, Appendix G)
Hose Assembly, Nonmetallic (Item 24.7, Appendix D)
Hose Assembly (Item 24.2, Appendix D)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Hose Assembly (Item 24.12, Appendix D)
Pan, Drain (Item 24, Appendix C)
Elbow, Pipe to Tube (Item 20.2, Appendix D)
Tool Kit, Genl Mech (Item 46, Appendix C)
Adapter, Straight, Pipe to Boss (2) (Item 1.1,
Wrench, Torque 0-200 lb-in. (Item 59, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Elbow, Pipe to Boss (2) (Item 20.1, Appendix D)
Crowfoot Attachment, Socket Wrench (Item 12.1,
Clamp, Loop (3) (Item 14.1, Appendix D)
Clamp, Loop (Item 14.2, Appendix D)
Socket Set, Socket Wrench (Item 34, Appendix C)
Screw, Cap, Hex Hd (4) (Item 53.1, Appendix D)
Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C)
Nut, Self-Locking (4) (Item 150, Appendix G)
Bracket, Angle (Item 13.1, Appendix G)
Washer, Flat (4) (Item 280.2, Appendix G)
Screw, Cap, Hex Hd (4) (Item 53.2, Appendix D)
Gasket (Item 29.3, Appendix G)
WARNING
Wear appropriate eye protection when working under vehicle due to the possibility of falling
debris. Failure to comply may result in injury to personnel.
Ensure exhaust system is cool before performing maintenance. Failure to comply may result in
injury to personnel.
Change 1
