TM 9-2320-366-20-4
(9) Install fitting (19) in transmission oil cooler (18).
(10) Position transmission oil cooler hose (20) on fitting (19).
NOTE
Position hole in fitting so that hole faces
upward towards engine.
(11) Install fitting (21) in transmission oil cooler (18).
(12) Position transmission oil cooler hose (22) on fitting (21).
(13) Tighten transmission oil cooler hoses (20 and 22) to 94-
104 lb-ft (127-141 Nm).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(14) Apply antiseize compound to threads of 45-degree fitting
(23).
(15) Install 45-degree fitting (23) on transmission oil cooler
hose (22).
(16) Connect transmission oil sampling hose (24) to 45-
degree fitting (23).
Change 1
8-113
