TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Exhaust pipe removed (para 5-3).
Goggles, Industrial (Item 15, Appendix C)
Transmission oil cooler tube removed, if equipped
Pan, Drain (Item 24, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Transmission oil cooler hose removed, if equipped
Materials/Parts
Filter Element, Fluid (Item 18, Appendix G)
Packing, Preformed (2) (Item 198, Appendix G)
WARNING
Wear appropriate eye protection when
working under vehicle due to the possibility
of falling debris. Failure to comply may
result in injury to personnel.
a. Removal.
(1) Position drain pan under back end of scavenge pump
hose (1).
(2) Disconnect scavenge pump hose (1) from 45-degree
fitting (2).
(3) Remove scavenge pump hose (1) from fitting (3).
Change 1
