TM 9-2320-366-20-4
FAN REPLACEMENT
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Batteries disconnected (para 7-57).
Lockwasher (2) (Item 92, Appendix G)
Transmission auxiliary oil cooler removed (para 8-11).
Nut, Plain, Blind Rivet (2) (Item 126, Appendix
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Tool Kit, Blind Rivet (Item 44, Appendix C)
a. Removal.
(1) Remove four screws (1), washers (2), and trans-mission
auxiliary oil cooler fan (3) from fan housing (4).
NOTE
Perform step (2) on vehicles equipped with
blind rivet nuts.
(2) Remove two screws (5), lockwashers (6), washers (7),
and EMI filter (8) from fan housing (4). Discard
lockwashers.
NOTE
Perform step (3) on vehicles equipped with
nuts.
(3) Remove two nuts (9), washers (10), screws (5),
lockwashers (6), washers (7), and EMI filter (8) from fan
housing (4). Discard nuts, washers, and lockwashers.
