TM 9-2320-366-20-4
(13) Position heat shield (15) on transmission auxiliary oil
cooler (16) with two washers (17), screws (18), washers
(19), spring washers (20), and self-locking nuts (21).
(14) Position two screws (22), washers (23), and self-locking
nuts (24) in heat shield (15).
(15) Tighten two self-locking nuts (21) to 22-26 lb-ft (29-35
Nm).
(16) Tighten two self-locking nuts (24) to 22-26 lb-ft (29-35
Nm).
(c). Removal (S/N 7162 and higher).
(1) Remove two self-locking nuts (1), washers (2), and
screws (3) from heat shield (4). Discard self-locking
nuts.
(2) Remove two self-locking nuts (5), spring washers (6),
washers (7), screws (8), washers (9), and heat shield (4)
from transmission auxiliary oil cooler (10). Discard self-
locking nuts and spring washers.
Change 1
