TM 9-2320-366-20-4
This task covers:
a. Removal
d. Installation
b. Disassembly
e. Follow-On Maintenance
c. Assembly
INITIAL SETUP
Equipment Conditions
Tools and Special Tools
Batteries disconnected (para 7-57).
Tool Kit, Genl Mech (Item 46, Appendix C)
Kick panel removed (para 16-3).
Materials/Parts
Seal Ring, Metal (Item 268, Appendix G)
a. Removal.
(1) Remove two screws (1) and washers (2) from WTEC II
VIM (3).
(2) Remove screw (4), washer (5), and two washers (6) from
WTEC II VIM (3).
(3) Loosen screw (7) in connector J116 (8).
(4) Disconnect connector J116 (8) from WTEC II VIM (3).
(5) Loosen screw (9) in connector PX33 (10).
(6) Disconnect connector PX33 (10) from WTEC II VIM (3).
(7) Remove WTEC II VIM (3) from vehicle.
