TM 9-2320-366-20-4
(6) Push in two tabs (9) on DUMP BED UP/DOWN switch
(7).
(7) Remove DUMP BED UP/DOWN switch (7) from dump
switch bracket (3).
(8) Perform steps (3) through (7) on remaining rocker
switch.
(9) Remove six screws (10) from auxiliary panel (11).
(10) Lift auxiliary panel (11) outward from auxiliary panel
housing (12) to gain access.
(11) Disconnect connector J925 (13) from connector
P925 (14).
(12) Remove auxiliary panel jumper cable assembly (15)
from auxiliary panel housing (12).
Change 2
