TM 9-2320-366-20-4
NOTE
All rocker switches are installed the same
way. DUMP BED UP/DOWN switch shown.
(5) Install DUMP BED UP/DOWN switch (7) in dump
switch bracket (8).
(6) Connect connector P911A (9) to DUMP BED
UP/DOWN switch (7)
(7) Connect connector P911 (10) to DUMP BED
UP/DOWN switch (7).
(8) Perform steps (5) through (7) on remaining rocker
switch.
(9) Position dump switch bracket (8) on instrument
panel (11) with two washers (12) and screws (13).
(10) Tighten two screws (13) to 24-30 lb-in. (2-3 Nm).
c.
Follow-On Maintenance.
(1) Connect batteries (para 7-57).
(2) Check rocker switches and tachometer operation
(TM 9-2320-366-10-1).
End of Task.
Change 2
7-747/(7-748 Blank)
