TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Material/Parts
Engine shut down (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape
Batteries disconnected (para 7-57).
(Item 20, Appendix D)
Lockwasher (8) (Item 100, Appendix G)
Nut, Self-Locking (2) (Item 133, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Splice, Conductor (8) (Item 274.3, Appendix G)
Tool Kit, Electrical (Item 45, Appendix C)
Ties, Plastic, Cable (Item 69, Appendix D)
Tape, Insulation, Electrical (Item 68, Appendix D)
a. Removal.
(1) Remove eight screws (1), lockwashers (2), and washers
(3) from control panel top cover (4).
Discard
(2) Remove two self-locking nuts (5), four washers (6), two
screws (7), and control panel top cover (4) from
WRECKER CONTROL PANEL (8). Discard self-locking
nuts.
(3) Open LH catwalk (9) and RH catwalk (10) on 30K winch
assembly (11).
Change 1
