TM 9-2320-366-20-4
(8) Loosen screw (19) on top of terminal blocks TB4A (20),
TB6A (21), TB12 (22), TB14 (23), TB18 (24), and TB19
(25).
(9) Remove ten wires (26) from top of terminal block TB4A
(20), TB6A (21), TB12 (22), TB14 (23), TB18 (24), and
TB19 (25).
(10) Loosen screw (27) on top of five terminal blocks TBC
(28).
(11) Remove six wires (29) from top of five terminal blocks
TBC (28).
NOTE
Note routing of wiring harness prior to removal.
Remove plastic cable ties as required.
(12) Remove 30K winch control wiring harness (30) from
vehicle.
b. Installation.
(1) Route 30K winch control wiring harness (1) on vehicle.
(2) Position six wires (2) on top of five terminal blocks TBC
(3).
(3) Tighten screw (4) on top of five terminal blocks TBC (3).
Change 1
7-705