TM 9-2320-366-20-4
NOTE
Install plastic cable ties as required.
(9) Connect two terminal lugs (19) to LH 30K winch solenoid
valve (20).
(10) Close LH catwalk (21) and RH catwalk (22) on 30K
winch assembly (23).
(11) Install control panel top cover (24) on WRECKER
CONTROL PANEL (25) with four washers (26), two
screws (27) and self-locking nuts (28).
(12) Install eight washers (29), lockwashers (30), and screws
(31) in control panel top cover (24).
c. Follow-On Maintenance.
(1) Connect batteries (para 7-57).
(2) Operate all wrecker functions and check for proper
operation (TM 9-2320-366-10-1).
End of Task.
Change 1
7-707
