TM 9-2320-366-20-4
7-113. M1089 HOIST UP SOLENOID CABLE REPLACEMENT (CONT)
b. Installation.
(1) Install hoist up solenoid cable (1) in compression nut (2),
washer (3), and connector (4).
(2) Install compression nut (2) on connector (4).
(3) Install quick disconnect terminal (5) on black wire (6).
(4) Install terminal lug (7) on white wire (8).
(5) Install quick disconnect terminal (5) on ground strip (9)
position 14.
(6) Install terminal lug (7) on terminal block (10) position 15
with screw (11).
(7) Apply varnish to quick disconnect terminal (5) and
terminal lug (7).
7-568
