TM 9-2320-366-20-4
7-93. M1084/M1086 HOIST UP SOLENOID CABLE REPLACEMENT (CONT)
b. Installation.
(1) Position hoist up solenoid cable (1) through clamp (2).
(2) Position hoist up solenoid cable (1) through compression
nut (3), washer (4), and connector (5).
(3) Install washer (4) and compression nut (3) on connector
(5).
(4) Tighten nut (6) on clamp (2).
(5) Install quick disconnect terminal (7) on black wire (8).
(6) Install terminal lug (9) on white wire (10).
(7) Install quick disconnect terminal (7) on ground strip (11)
position 11.
(8) Install terminal lug (9) on terminal block (12) position 23
with screw (13).
(9) Apply varnish to quick disconnect terminal (7) and
terminal lug (9).
7-464
