TM 9-2320-366-20-4
NOTE
Tag wires and connection points prior to
disconnecting.
(4) Remove screw (6) from terminal block (7) position 28.
(5) Disconnect quick disconnect terminal (8) from ground
strip (9) position 17.
(6) Remove quick disconnect terminal (8) from black wire
(10).
(7) Remove terminal lug (11) from white wire (12).
(8) Loosen nut (13) on clamp (14).
(9) Remove compression nut (15) and washer (16) from
connector (17).
(10) Remove hoist up lockout solenoid cable (18) from
connector (17), washer (16), and compression nut (15).
(11) Remove hoist up lockout solenoid cable (18) from clamp
(14).
7-459