TM 9-2320-366-20-4
NOTE
Tag wires and connection points prior to
disconnecting.
(4) Remove two screws (6) from terminal block (7) positions
10 and 11.
(5) Disconnect quick disconnect terminal (8) from ground
strip (9) position 12.
(6) Remove quick disconnect terminal (8) from red wire (10).
(7) Remove terminal lugs (11 and 12) from white wire (13)
and black wire (14).
(8) Remove compression nut (15) and washer (16) from
connector (17).
(9) Remove left jack cylinder proximity sensor cable (18)
from connector (17), washer (16), and compression nut
(15).
7-467
