TM 9-2320-366-20-4
NOTE
Tag wires and connection points prior to
disconnecting.
(4) Remove screw (6) from terminal block (7) position 24.
(5) Disconnect quick disconnect terminal (8) from ground
strip (9) position 1.
(6) Remove terminal lug (10) from white wire (11).
(7) Remove quick disconnect terminal (8) from two black
wires (12).
(8) Loosen nut (13) on clamp (14).
(9) Remove compression nut (15) and washer (16) from
connector (17).
(10) Remove hoist down solenoid cable (18) from connector
(17), washer (16), and compression nut (15).
(11) Remove hoist down solenoid cable (18) from clamp (14).
7-455
