TM 9-2320-366-20-4
7-90. M1084/M1086 CRANE POWER CABLE REPLACEMENT (CONT)
b. Installation.
(1) Route crane power cable (1) through clamp (2).
(2) Route crane power cable (1) through clamp (3),
compression nut (4), and connector (5).
(3) Install compression nut (4) and clamp (3) on connector
(5).
(4) Tighten two screws (6) on clamp (3).
(5) Tighten nut (7) on clamp (2).
(6) Install quick disconnect terminal (8) on green wire (9).
(7) Install terminal lug (10) on white wire (11).
(8) Install terminal lug (12) on red wire (13).
(9) Install terminal lug (14) on black wire (15).
(10) Install quick disconnect terminal (8) on ground strip (16)
position 16.
(11) Install terminal lug (10) on terminal block (17) position 3
with screw (18).
(12) Install terminal lug (12) on terminal block (17) position 4
with screw (18).
(13) Install terminal lug (14) on terminal block (17) position 5
with screw (18).
(14) Apply varnish to quick disconnect terminal (8) and
terminal lugs (10, 12 and 14).
7-452
