TM 9-2320-366-20-4
(4) Remove screw (6) from terminal block (7) position 8.
(5) Disconnect quick disconnect terminal (8) from ground
strip (9) position 19.
(6) Remove quick disconnect terminal (8) from black wire
(10).
(7) Remove terminal lug (11) from white wire (12).
(8) Loosen nut (13) on clamp (14).
(9) Remove compression nut (15) and washer (16) from
connector (17).
(10) Remove control lockout solenoid cable (18) from
connector (17), washer (16), and compression nut (15).
(11) Remove control lockout solenoid cable (18) from clamp
(14).
7-447
