TM 9-2320-366-20-4
7-89. M1084/M1086 CONTROL LOCKOUT SOLENOID CABLE REPLACEMENT (CONT)
b. Installation.
(1) Position control lockout solenoid cable (1) through clamp
(2).
(2) Position control lockout solenoid cable (1) through
compression nut (3), washer (4), and connector (5).
(3) Install washer (4) and compression nut (3) on connector
(5).
(4) Tighten nut (6) on clamp (2).
(5) Install quick disconnect terminal (7) on black wire (8).
(6) Install terminal lug (9) on white wire (10).
(7) Install quick disconnect terminal (7) on ground strip (11)
position 19.
(8) Install terminal lug (9) on terminal block (12) position 8
with screw (13).
(9) Apply varnish to quick disconnect terminal (7) and
terminal lug (9).
7-448
