TM 9-2320-272-24-4
Install filter screen (3), adapter fitting (4), and elbow (5) on transfer case (2). Tighten elbow (5)
84.
15 lb-ft (20 Nm).
NOTE
Perform steps 85 and 86 for vehicles equipped with PTO.
85.
Install elbow (1) on PTO (7). Tighten elbow (1) 26 lb-ft (35 Nm).
86.
Connect oil line (6) to elbows (5) and (1).
Install nipple end of elbow (13) on oil pump (8). Tighten elbow (13) 20 lb-ft (27 Nm).
87.
88.
Connect oil line (14) to elbows (5) and (13).
89.
Install new seal (9) on cover (12).
Install new seal (17) on piston (16).
90.
Install new gasket (18). new piston (16), new cylinder (15), and cover (12) on transfer case (2) with
91.
four new locking plates (11) and screws (10). Tighten screws (10) 5-10 lb-ft (8-13 Nm).
Bend tabs of locking plates (11) over heads of screws (10).
92.
5-428
