TM 9-2320-272-24-4
33.
Remove hi-lo shaft seal (2) from transfer case housing (1). Discard seal (2).
34.
Remove six screws (6), washers (5), main input shaft cover (4), and shim pack (3) from transfer
case housing (1).
35.
Remove seal (7) from main input shaft cover (4). Discard seal (7).
36.
Remove plug (12) from intermediate shaft cover (9).
37.
Remove six screws (11), washers (10), intermediate shaft cover (9), and shim pack (8) from transfer
case housing (1).
38.
Remove six screws (14), washers (15), and front output shaft cover (16) from transfer case
housing (1).
39.
Remove seal (13) from front output shaft cover (16). Discard seal (13).
40.
Remove front output shaft (17) from transfer case housing (1).
NOTE
When disassembling front output, rear output, and intermediate
41.
Using flat-axle type bearing puller, remove front output shaft bearing (18) from front output
shaft (17).
42.
Remove snapring (19) from front output shaft bearing (18).
43.
Remove spacer (24) from rear output shaft (21).
44.
Using arbor press, remove rear output shaft bearings (20) and (23), and gear (22) from rear output
shaft (21).
5-406
