TM 9-2320-272-24-4
23.
Loosen setscrew (13) and remove collar (12), seal (ll), and baffle (10) from main input shaft (7).
Discard seal (11).
24.
Remove seven screws (20), washers (19), flange (3), and shim pack (4) from transfer case (5).
25.
Remove slinger (1) and seal (2) from flange (3). Discard seal (2).
26.
Remove four screws (17), washers (18), two screws (16), washers (15), and gear cover (14) from
transfer case (5).
27.
Remove nineteen screws (9) and washers (8) from transfer case cover (21).
28.
Position puller on transfer case cover (21) with drive screw of puller over intermediate shaft (7) and
two long screws through puller and into transfer case cover (21).
29.
Remove transfer case cover (21) from transfer case housing (22).
5-404
