TM 9-2320-272-24-4
4.
Inspect three dowel pins (2) for bends and breaks. Replace dowel pins (2) if bent or broken.
5.
Remove filler plug (5) and drainplug (6) from transfer case housing (8) and inspect for stripped
threads. Replace plugs (5) or (6) if threads are stripped.
6.
Inspect freeze plugs (7) and (9) for looseness. Replace freeze plugs (7) or (9) if loose.
7.
Inspect transfer case cover (3) and housing (8) for breaks, cracks, and stripped threads. Replace
transfer case cover (3) or housing (8) if broken, cracked, or threads are not repairable (para. 2-5).
NOTE
Transfer case housing and cover bearings and bearing races are
matched parts and must be replaced as a set.
Perform steps 9 and 10 if bearings or bearing races fail
inspection.
8.
Inspect bearings (4) and bearing races (1) in accordance with TM 9-214. If damaged, replace
bearing (4) and matched bearing race (1).
9.
Remove bearing race (1) from transfer case housing (8) or cover (3) by tapping alternately around
outer edge of bearing race (1). Discard bearing race (1).
10.
Using arbor press, install new bearing race (1) on transfer case housing (8) or cover (3).
5-410
