TM 9-2320-272-24-4
7.
Disconnect oil line (4) from elbows (3) and (5).
8.
Remove elbow (3) from oil pump (2).
NOTE
Perform steps 9 and 10 for vehicles equipped with transfer case
power takeoff (PTO).
9. Disconnect oil line (9) from elbows (5) and (8).
10. Remove elbow (8) from PTO (10).
11. Remove elbow (5), adapter (6), and filter screen (7) from transfer case (1). Clean filter screen (7).
NOTE
Mark position of oil pump for installation.
12. Remove six screws (13), washers (12), and oil pump (11) from transfer case (1).
13. Bend tabs of locking plates (15) away from screws (16).
14. Remove four screws (16), locking plates (15), cover (14), cylinder (18), piston (19), and gasket (21)
from transfer case (1) and declutch shaft (22). Discard gasket (21), piston (19), cylinder (18), and
locking plates (15).
15. Remove seals (17) and (20) from cover (14) and piston (19). Discard seals (17) and (20).
WITHOUT TRANSFER CASE PTO
5-400
