TM 9-2320-272-24-4
5-42. TRANSMISSION OIL PAN AND FILTER MAINTENANCE
THIS TASK COVERS:
c. Installation
a. Removal
b. Cleaning and Inspection
INITIAL SETUP:
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-24P
All
EQUIPMENT CONDITION
TOOLS
Transmission torque converter removed (para. 5-41).
General mechanic's tool kit (Appendix E, Item 1)
Torque wrench (Appendix E, Item 146)
SPECIAL ENVIRONMENTAL CONDITIONS
MATERIALS/PARTS
Work area clean and free from blowing dirt and
dust.
O-ring (Appendix D, Item 429)
Transmission oil filter (Appendix D, Item 699)
Gasket (Appendix D, Item 159)
1.
Remove twenty-one screws (l), oil pan (2), and gasket (3) from transmission (4). Discard
gasket (3).
2.
Rotate transmission (4) in stand until oil pan (2) mounting surface is horizontal and facing upward.
3.
Remove oil filter screw (6), oil filter (7), and filter suction tube (8) from transmission (4).
4.
Remove filter suction tube (8) from oil filter (7). Discard oil filter (7).
5.
Remove O-ring (9) from filter suction tube (8). Discard O-ring (9).
1.
For general cleaning instructions, refer to para. 2-14.
2.
For general inspection instructions, refer to para. 2-15.
3.
Inspect oil pan (2) for cracks. If cracked, replace oil pan (2).
NOTE
New oil pan has a plug in left side fill port.
If oil pan is defective, remove plug if present.
4.
Remove oil plug (5). Retain for installation in new oil pan (2).
5-300
